|
|
International 4300:
- 4100, 4200, 4300 and 4400 International share cab design
- 4100 and 4200 use VT365 V8 diesel only
- 4300 uses DT466 I6 diesel only
- 4400 has standard DT466 and optional DT570 and HT570 diesels
- 4400 available tandem rear suspension and tractor
- Available regular cab, extended and crew cabs
- WB from 128 to 254 on 4300
- Frame and components now shared with Ford F-650/F-750
H-Series Advantages Over International 4300:
- Standard transmission is Allison 2000 5-speed closeratio automatic with 0.75:1 overdrive top gear and easy-to-use column shift (Allison 2000 is $3,168 option on International)
- Isuzu cab shares numerous components with well-proven, high-volume vehicles designed to Isuzu standards. International has no high-volume vehicles in its lineup.
- 8-bolt crossmember ends, vs. 2-bolt crossmember ends on International, for added strength
- Full-depth, straight crossmembers, vs. dogbone crossmembers on International, forstrength
- Opposed-piston hydraulic brake calipers offer long life, easy service and powerful braking (International uses sliding pin, single-piston brake calipers)
- Available driver and front passenger air bags contribute to driver and passenger safety (not available on International)
- Rubber-isolated exterior lamps with no-tool tailamp lens removal can help reduce downtime (not available on International)
- Large, folding mirrors with integrated wide-angle mirror and numerous options for power and heat. Cowl-mounted for low vibration and durability (International has door-mounted West Coast mirrors with tubular steel top and bottom attachments)
- Available electronic traction control helps improve traction on slippery surfaces (not available on International)
- Standard synthetic lubricant in transmission and axle helps reduce downtime and adds value (International option)
- Variable-effort ZF steering gear reduces steering effort in tight turns (International has TRW Ross fixed-effort steering gear)
- Standard driver and passenger seats includes manual lumbar support and back angle adjustment, for driver comfort (International standard seat has folding backrest only)
- Standard progressive spring aids help reduce shock loading to frame and load when driving on rough surfaces (International uses hard rubber bump stops)
- H-Series shift lever and parking brake is less obtrusive than floor-mounted installation pods on International, adding to center passenger room and cupholder convenience
back to top |
| |
Isuzu HTR/HVR/HXR |
International 4300 |
| Engine |
Isuzu OHC I-6
|
Intl. MaxxForce DT OHV I-6 |
| Diesel displacement |
7.8L
|
7.6L |
| Base diesel power |
215 |
200 |
| Max. diesel power |
300 |
300 |
| Base diesel torque, lb.-ft. |
560 |
520 |
| Max. diesel torque, lb.-ft. |
860 |
860 |
| Steering |
ZF power |
TRW power |
| Front springs, std. |
Taperleaf |
Taperleaf |
| Rear springs, std. |
Taperleaf |
Multileaf |
| Hydraulic brakes |
Meritor |
Bosch |
| Brakes, front in. |
15.37 disc |
15 disc |
| Front brake type |
Opposed piston |
Sliding pin |
| Brakes, rear in. |
15.37 disc |
15 disc |
| Air brakes |
Meritor |
Meritor |
| Brakes, front in. |
15 x 4/16.5 x 6 |
15 x 4/16.5 x 6 |
| Brakes, rear in. |
16.5 x 7 |
16.5 x 7 |
| Frame, psi |
50,000 |
50,000 |
| Frame section modulus |
12.53 cu. in. |
10.125 cu. in. |
| Frame RBM |
1,378,300 |
506,250 |
| Battery, CCA |
2x750 |
2x550 |
| Fuel tank, gal. |
50 LH |
50 RH |
| Seating |
2 buckets |
2 buckets |
| Mirrors, in. |
7x12 + 7x6 |
7.4x14.8 + 7.4x7.4 |
| WB/CA/Turning Diameter |
128/60/40.7
140/72/43.6
152/84/43.6
170/102/45.3
176/108/46.6
188/120/49.4
194/126/50.8
206/138/53.6
212/144/54.9
224/156/57.7
236/168/60.5
248/180/63.2
260/192/66.0
272/204/68.8
284/216/71.5
296/228/74.3 |
128/61/37.5
140/73/40.3
152/85/43.2
169/102/47.3
175/108/48.8
187/120/51.7
205/138/56.2
217/150/59.0
236/169/63.7
254/187/68.0 |
| WB/Body lengths |
128/8
140/8-10
152/8-12
170/10-14
176/10-16
188/12-18
194/14-18
206/16-20
212/18-24
224/18-24
236/18-26
248/18-28
260/20-28
272/20-30
284/22-30
296/22-30 |
128/8
140/8-10
152/8-12
169/10-14
175/10-16
187/12-18
205/16-20
217/18-24
236/18-26
254/20-28 |
| back to top |
| |
Isuzu HTR/HVR/HXR |
International 4300 |
| DEX-COOL |
Standard |
Standard |
| Engine hour meter |
Standard |
Standard |
| Door sill storage |
Standard |
Not Available |
| Road speed governor |
Standard |
Standard |
| Air filter gauge |
Standard |
Standard |
| Synthetic lube |
Standard |
Optional |
| Daytime running lamps |
Standard |
Standard |
| Integral convex mirror |
Standard |
Standard |
| Oil life monitor |
Standard |
Not Available |
| back to top |
| |
Isuzu HTR/HVR/HXR |
International 4300 |
| Hystec cab mount |
Optional |
Not Available |
| Power door locks |
Optional |
Optional |
| Remote Keyless Entry |
Optional |
Not Available |
| Power, heat mirrors |
Optional |
Optional |
| Driver air seat |
Optional |
Optional |
| Passenger air seat |
Optional |
Optional |
| Elect. Traction Control |
Optional |
Not Available |
| Locking differential |
Optional |
Optional |
| 80,000 psi frame |
Optional |
Optional |
| Taperleaf rear springs |
Optional |
Standard |
| Air bag, pass. & driver |
Optional |
Not Available |
| Tilt wheel |
Optional |
Standard |
| Auto engine shutdown |
Optional |
Standard |
| back to top |
| |
Isuzu HTR/HVR/HXR |
International 4300 |
| Base warranty |
24 months/unlimited mileage |
24 months/unlimited mileage |
| Engine warranty |
36 months/unlimited mileage
|
36 months/150,000 mi. |
| back to top |
|